JSMin: Unterminated String at byte 246: "Loupe de noyer us 55 x 30 cm.JSMin: Unterminated String at byte 253: "Loupe de noyer us 55 x 30 cm.JSMin: Unterminated String at byte 1270: "Loupe de noyer us 55 x 30 cm.
Dimensions: 55 x 30 cm
Thickness: 0.5 mm.
Warning: Please carefully read the detailed description of this product by clicking on its title.
20 Item Items
Warning: Last items in stock!
Availability date: 0000-00-00
By buying this product you can collect up to 3 loyalty points. Your cart will total 3 points that can be converted into a voucher of 3,00 EUR.
|2||29,69 EUR||Up to 3,13 EUR|
|5||28,13 EUR||Up to 15,63 EUR|
|10||26,56 EUR||Up to 46,88 EUR|
|Thickness in mm||0.5|
|Length in cm||55|
|Width in cm||30|
Genuine Walnut wood sliced veneer sheets.
This product is not suitable for neophytes. Just like crotches, burls are veneers with a lot of counter-grain and therefore can be buckled. You will have to manage possible spits or open defects.
To manage the buckled, visit our blog article: LE PLACAGE CONDOLÉ.
Dimensions measured at the small end.*
Length: 55 cm.
Width: 30 cm.
Thickness: 0.5 mm.
- Width rounded to the covered centimeter: 15.8 giving 15 cm.
- Length rounded to 5 centimeters: 257 giving 255 cm.
Pictures herewith are actual photos of the product you will receive.
For presentation, the veneer sheets may have been juxtaposed to give you a better idea of the final aspect after splicing. This has been only a suggestion; you may display it as per your wishes.
Walnut, botanical name: Juglans.
From France or North America, this wood is appreciated in furniture, decoration, luxury car dashboards, guitars, luthiery, and old radio stations.
Its grey color in its raw state turns into a more or less dark brown once varnished or oiled.
With the patina of time, its brown color will turn into orange honey. If you wish to get this orange honey color, you may choose a blonde walnut with a light tinted finish.
Several specialties are particularly requested, such as its swirl (root part of the trunk offering a very turbulent veining) or its burl (outgrowth formed by hundreds of small pin-knots).
Like all burls, it is necessary to fill up some open small black knots with wood paste or use the cookie-cutter technique for larger knots.
In the case of the poplar burl, the filling work might be more important than with other burls.
Genuine wood sliced veneer sheets.
These veneers are raw without a finish or any fleece back.
The veneer surface is similar to plane wood; however, it will be preferable to forecast a light sanding after gluing.
The veneers are offered here as wood sliced sheets of one and unique thickness.
Both faces of these veneers are the same, without fleece back, without glue.
Even if the veneer's sides had been cut relatively straight, it isn't a precise parallel clipping, and some veneers may have kept the decreasing shape of the tree, wider at the bottom end and narrower at the top end.
Very occasionally, some veneers' sides have traces unclipped wane, but our veneers are measured at the narrowest, as explained in the paragraph sizes.
As genuine natural wood, all finishing products are acceptable as long as these products are meant to be for wood usage.
The choice of the finished product has to be consistent with the realization of final usage.
Burls or Swirls are made up of small knots, which gives it its special character. It also means that some of these knots are piercing, and open slits are considered part of this type of wood.
After gluing, you can fill in the small holes with wood paste to obtain a complete filling, or before gluing, cut the larger holes with a cookie cutter and place a veneer washer of the same size taken from a scrap.
By nature, burls and swirls are with a lot of counter grain, and therefore its veneer is often buckled; even when it has been pressed, it may still be slightly buckled.
To not split the wood during pressing, it's recommended to moisten it before gluing (the more the wood will be wet, the more it will become flexible and flat).
Once wet, you can press it by drying it (make a rotation with a paper towel that will absorb the humidity) or use a polyurethane type glue (often sold as exterior wood glue in DIY stores) which will stick harder if the wood is damp, it will then be necessary to press with a backing plate, weights and clamps.
Veneers are rolled and well protected in a strong carton chosen to resist somewhat vigorous handling and be delivered to you in good condition.
Sold by the sheet, decreasing prices upon quantity.
Should you need more info, please contact us either by E-MAIL or by telephone at +33 (0)3 29 79 31 17
Have a look at our TUTORIALS, and you might find some useful tips.