Spruce 0.9 mm narrow-width small-size veneer

Spruce 0.9 mm narrow-width small-size veneer

Genuine wood-sliced veneer sheets.

Dimensions:

Fix length of 30 cm long.

Width:10 cm.

Thickness: 0.9 mm.

Sold by the sheet.

Measurement scaling:

Width rounded to the covered centimeter: 15.8 giving 15 cm.

Species:

Botanical name: Picea Abies.

Common name: Spruce.

Naturally established in mountainous areas such as the Vosges, the Jura, and the Alps, it is a remarkable timber offering elasticity and resistance.

They are traditionally used in carpentry, joinery, and shipbuilding.

It is also used to manufacture Comtoise clocks, boxes, and the strapping of Mont d'Or.

Spruce is appreciated in lutherie to realize soundboards of stringed instruments such as the violin or the guitar.

Product Description:

Genuine wood-sliced veneer sheets.

These veneers are raw without a finish or any fleece back.

The veneer surface is similar to plane wood. However, it will be preferable to forecast a light sanding after gluing.

The veneers are offered here as wood-sliced sheets of one and unique thickness.

Both faces of these veneers are the same, without fleece back, without glue.

Even if the veneer's sides had been cut relatively straight, it isn't a precise parallel clipping; some veneers may have kept the decreasing shape of the tree, wider at the bottom end and narrower at the top end.

Very occasionally, some veneers' sides have traces of unclipped wane, but our veneers are measured at the narrowest, as explained in the paragraph "dimensions."

As genuine natural wood, all finishing products are acceptable as long these products are meant to be for wood usage.

The choice of the finished product must be consistent with the final usage realization.

Photos:

To keep the cost of these products as cheap as possible and contrary to other veneers on this website, the pictures of Small Size Veneers do not represent the available stock.

More information:

Please look at our TUTORIALS; you might find some valuable tips.

Please contact us for any additional information by E-MAIL or phone.