Birch narrow-width small-size veneer

Birch narrow-width small-size veneer

€2.10
Tax included
210.204.02 PF
26 Items
Available

Birch narrow-width, small-size veneer

Genuine wood sliced-veneer sheets.

Fix length of 30 cm long.

Width: From 10 to 14 cm.

Thickness: 0.6 mm.

Sold by the sheet.

Volume discounts

Quantity Unit discount You Save
3 5% €0.32
5 10% €1.05
10 15% €3.15
Quantity

Birch narrow-width, small-size veneer

Genuine wood sliced-veneer sheets.

Dimensions:

Fix length of 30 cm long.

Width: From 10 to 14 cm.

Thickness: 0.6 mm.

Sold by the sheet.

Measurement scaling:

Width rounded to the covered centimeter: 15.8 giving 15 cm.

Species:

Common Name: Birch

Botanical Name: Betula

Wood Description:

Its wood, with a silvery white color and slightly veined, is appreciated for its fineness and uniformity.

In our latitudes, birch is rather a softwood with large growth rings. However, this is a birch from the cold regions of Scandinavia, where its slow growth gives it a remarkable density and hardness. It can be said to be the hardest of softwoods or the softest of hardwoods.

Uses:

Once used by clog makers and wheelwrights, it is now popular with designers for the manufacture of Scandinavian furniture with a minimalist design.

The Masur Birch, a rare variety with flamboyant veining, is particularly popular in decoration and cutlery.

Product Description:

Genuine wood-sliced veneer sheets.

These veneers are raw without a finish or any fleece back.

The veneer surface is similar to plane wood. However, it will be preferable to forecast a light sanding after gluing.

The veneers are offered here as wood-sliced sheets of one and unique thickness.

Both faces of these veneers are the same, without fleece back, without glue.

Even if the veneer's sides had been cut relatively straight, it isn't a precise parallel clipping; some veneers may have kept the decreasing shape of the tree, wider at the bottom end and narrower at the top end.

Very occasionally, some veneers' sides have traces of unclipped wane, but our veneers are measured at the narrowest, as explained in the paragraph "sizes."

As genuine natural wood, all finishing products are acceptable as long these products are meant to be used for wood.

The choice of the finished product must be consistent with the final usage realization.

Photos:

To keep the cost of these products as cheap as possible and contrary to other veneers on this website, the pictures of small-size veneers do not represent the available stock.

More information:

Please look at our TUTORIALS; you might find some valuable tips.

Please contact us by email or phone for any additional information.

Bois d'Europe
210.204.02 PF
26 Items

Data sheet

Species
Birch
Thickness group
Standard
Width group
Narrow width